Installation Guide

vinyl siding panel
repairs
Vinyl Siding Panel
To repair or replace a siding panel,
insert the zip-lock tool under the butt
of the course above the damaged
panel.
Pull downward and slide the tool
along the length of the panel.
Remove the nails of the damaged
panel.
Install the replacement panel making
sure the lock is re-engaged. (Use the
ziplock tool to re-engage the panel
by forcing the bottom lock over the
newly replaced panel.) (Fig.1)
When re-nailing, be sure panel
can move freely in a horizontal
direction to allow for expansion and
contraction. (Fig. 2)
Fig. 1
Fig. 2
56