Patent Pending © PLX Devices Inc.
1 Background 1.1 Patents PLX Devices Inc. has patents pending on Kiwi’s architecture, algorithms and intellectual properties. 1.2 Warnings Do not operate this product under direct sunlight or in high temperatures. Damage and malfunction may occur. To prevent fire or shock hazard, do not expose this product to rain or moisture. Do not operate this product while driving. This may interfere with driving operations, resulting in an accident or even death.
2.1 Installation START YOUR ENGINE BEFORE CONNECTING FOR THE FIRST TIME. Locate the OBDII connector and simply plug Kiwi MPG in. This connector is often located on the driver’s side near or under the steering column. Flip the power switch to the “up” position to turn the unit on. 2.2 Navigating Navigating the Kiwi MPG is performed by pressing the ‘Mode’ and the ‘Set’ button.
3.1 Instantaneous MPG Instantaneous MPG is displayed constantly in this mode. (Supported Units: MPG, Km/L, L-100Km). 3.2 Trip MPG Average MPG is accumulated and displayed over multiple trips in this mode. You may reset your trip at any time. (Supported Units: MPG, Km/L, L-100Km). 3.3 Trip Dollars Your total dollars of gas is accumulated over multiple trips. You may reset this to zero at any time. (All worldwide currencies supported).
4.5 RPM This mode shows your engine’s speed or (tachometer revolutions/minute). 4.6 Vehicle Speed This mode shows your vehicles’ speed. (Supported Units: MPH, kmh) 4.7 Throttle Position This mode shows your throttle position or position of your gas pedal. This is great for determining how much “load” is exerted on your engine. 4.8 Coolant Temperature This mode shows your engine’s coolant temperature. (Supported Units: Fahrenheit, Celsius) 5 Engine Check 5.
.2 MPG Calibration This mode allows you to calibrate the fuel efficiency reading. It is recommended that you leave this at the default value of 1.00. However, if you’re MPG readings are inaccurate due to the type of vehicle you have, you can manually correct for this by adjusting the MPG Cal. Press the set button to enter you into the set mode. When you’re in this mode, press the mode button to change the digit position. Press the set button to increment the number.
6.4 Set Units This mode allows you to set the unit of measurement. 0 - Mode 1 (Gallons, Miles, MPG, Dollars, MPH, Fahrenheit) *default 1 - Mode 2 (Liters, Kilometers, Km/L, Dollars, kmh, Celsius) 2 - Mode 3 (Liters, Kilometers, L-100Km, Dollars, kmh, Celsius) 6.5 Setup Fuel Type This mode allows you to set the fuel type. 0 1 2 3 4 5 6 - Gasoline (14.7) *default - Diesel (14.6) - E85 (9.86) – Ethanol (9.0) – Methanol (6.4) – CNG (17.2) – LPG (15.
TERMS OF USE - PLX Devices Inc. does not guarantee product functionality with ALL vehicles. Implementation and integration of the PLX products with any other device(s) must be done at your own risk. Improper installation and usage may lead to engine damage. Mount and install PLX products in a location where it does not obstruct the driver’s view and/or ability or safely control the vehicle. LIMITED WARRANTY - PLX Devices Inc.
