Data Sheet

10
11
[1] Setting the Month
Press and hold the M Button for three (3)
seconds. A blinking number indicating the
month will appear on the lower left display
corner. Press and release the C Button until
correct month appears. Press the M Button
to set. You are now ready to set the date.
[2] Setting the Date
Press the C Button until blinking number
represents correct date. Press the M Button
to set and move to time setting mode.
Setting the Month and Date
• Helpful Tip
Press and hold the M Button for three (3) seconds to begin and
end the setting of the date, time, year or measurement unit on
the meter. Use the C Button for scrolling. To scroll more quickly,
hold the C Button down.
Setting the Meter
When you turn on your CareSens II Meter
the first time, its display will show the
following setting:
Display format for the date: MM-DD •
(Month-Date)
Display format for the time: 12 h •
(AM/PM)
Year: year of manufacture•
• Helpful Tip
To set any date, time, or unit of measurement, you must begin
by setting the month and date mode and consecutively go
through the process.
To set the display, press and hold the M
Button for three (3) seconds.