Data Sheet

38
39
Use a soft cloth or tissue to wipe the meter exterior. If necessary,
the soft cloth or tissue might be dipped in a small amount of
alcohol. Do not use organic solvents such as benzene, acetone,
or household and industrial cleaners that may cause irreparable
damage to the meter.
Store all the meter components in the portable case to prevent
loss.
Caring for Your System
Do not clean the meter with household or industrial cleaning
solvents, benzene or acetone.
Caution :
Do not expose the meter to direct sunlight or heat for an •
extended period of time.
Prevent the entry of dirt, dust, blood, or water at the meter’s •
test strip port.
Do not drop the meter or submit it to strong shocks.•
Do not try to fix or alter the meter in any way.•
Keep the meter in a cool and airy place.•
Keep the meter away from strong electromagnetic fields •
such as cell phones and microwave ovens.
CareSens II • meter should be used only with CareSens test
strips.
• Helpful Tip
Keep all system components in the carrying case to prevent loss.
Hi Message•
If your test result is above 600 mg/dL
(33.3 mmol/L), Hi appears on the display.
A test result above 600 mg/dL (33.3 mmol/L)
may indicate hyperglycemia (high blood
glucose).
Lo Message•
If your test result is below 20 mg/dL (1.1 mol/L),
Lo will appear on the display.
This may indicate hypoglycemia (low blood
glucose).
Hi and Lo Messages
The CareSens II Meter displays test results between 20 to
600 mg/dL (1.1-33.3 mmol/L). Please refer to the instructions
below if you receive a Hi or Lo message.
If you receive a Hi or Lo message, repeat the test. If the
result is the same, contact your physician immediately.
If Hi or Lo message does not reflect how you feel, contact
your authorized i-SENS sales representative.