Data Sheet

26
27
[1] Wash hands and fingertip sample
site with soap and warm water.
Rinse and dry thoroughly.
[2] Unscrew lancing device tip.
[3] Firmly insert new lancet into carrier.
Hold lancet firmly. Gently twist to
pull off protective disk. Save disk to
recap lancet after use. Replace
lancing device tip.
Preparing the Lancing Device for
Blood Sample Retrieval
You will need a lancing device in order to collect a blood sample.
You may use the lancing device contained in the CareSens II Blood
Glucose Monitoring System or any other medically approved
lancing device.
Using the Lancing Device
The lancing device should be used by one individual and •
communal use is strongly discouraged.
Use a soft cloth or tissue to wipe the lancing device. •
If necessary, a small amount of alcohol on a soft cloth or •
tissue may be used.
To avoid infection when drawing a sample, use a lancet only
one time, and:
Do not use a lancet that has been used by others.•
Always use a new sterile lancet.•
Keep the lancing device clean.•
• Helpful Tip
Repeated puncturing at the same sample site may cause pain or
skin calluses. Choose a different site each time you test.
Adjustable Tip
Ejection System
Sliding Barrel
Release Button
Lancet Holder