Data Sheet

16
17
The CareSens Test Strip supports the accurate measurement
of glucose levels in a capillary whole blood sample.
[1] Contact Bars
Gently push the test strip, with its contact bars facing up, into the
test strip port of meter.
[2] Confirmation Window
Check here to see whether sufficient blood sample has been
applied.
[3] Edge to apply blood sample
Apply blood sample here for testing.
CareSens II Blood Glucose Test Strip
Insert
1
2
3
[1] Start with meter off.
Remove CareSens II Check Strip from the
package.
Insert CareSens II Check Strip contact end
into test strip port.
[2] After a few seconds, meter displays 'YES’.
'YES’ in the display of the meter means the
meter is functioning properly.
Remove the CareSens II Check Strip.
Return to the package.
• Helpful Tip
If segments are missing from display or 'no’ appear, do not use
meter for testing. Contact your authorized i-SENS representative.
Checking the Meter
with the CareSens II Check Strip
The CareSens II Check Strip is used to determine if the meter
is functioning properly. To perform the test, start with the
meter turned off.
Perform a CareSens II Check Strip when:
the • CareSens II meter is used for the first time
the battery is replaced•
the test result seems inaccurate or does not reflect how you feel•
the • CareSens II meter seems to be not working properly
the • CareSens II meter is dropped or banged