Data Sheet

Synchronization (SYNC)
Kit Data Sheet
SYNC 27042015
!
!
!
PLUX – Wireless Biosignals, S.A.
Av. 5 de Outubro, n. 70 – 8.
1050-059 Lisbon, Portugal
[e-mail]
http://biosignalsplux.com/
REV A!
© 2015 PLUX
This information is provided "as is," and we make no express or implied warranties whatsoever with respect to functionality, operability, use,
fitness for a particular purpose, or infringement of rights. We expressly disclaim any liability whatsoever for any direct, indirect, consequential,
incidental or special damages, including, without limitation, lost revenues, lost profits, losses resulting from business interruption or loss of data,
regardless of the form of action or legal theory under which the liability may be asserted, even if advised of the possibility of such damages.
!
!
SPECIFICATIONS
> Ports: 3 in / out
> Sensors: Momentary switch
> Actuators: LED; Digital sync cable
FEATURES
> Digital port breakout cable
> Interchangeable accessories
> Up to 11 possible combinations
> Small form factor
> Raw data output
> Easy-to-use
APPLICATIONS
> Synchronization with a video camera
> Manual event annotation
> Multi-device synchronization
GENERAL DESCRIPTION
Our synchronization (SYNC) accessory
bundles a handful of tools to meet your multi-
device and third-party device synchronization
needs. All the parts connect to the digital port
(marked with the left / right arrow on the
casing). The Digital Sync Cable (DSC), LED,
and switch can all be interchangeably
connected to the digital port individually (e.g.
imagine that you just need to use the switch,
that can be connected directly to the digital
port; the same goes for the LED and DSC).
A 3-port breakout adapter enables one to
connect the DSC, LED, and switch at the
same time if needed (e.g. if you want to use
the LED together with the switch, or any other
combination of the three).
The DSC is useful when multiple
biosignalsplux hubs are used simultaneously,
to have a way of synchronizing them.
The switch is useful to manually introduce
annotations synchronised with the biosignal
data.
The LED is useful to introduce a marking in a
video, to help remove the time offset
introduced by starting the video and biosignal
recording at different time instants (a few
seconds / milliseconds apart).
Fig. 1. Our accessory is provided with all the main tools
needed for third-party and multi-device synchronization.