Data Sheet

biosignalsplux
User Manual
!
!
!
94!of!159!
!
4.3 3rd Party Compatibilities
biosignalsplux devices allow the usage and acquisition of data from 3
rd
party sensors,
using the available biosignalsplux breakout PCB. This accessory allows to connect analog
or digital third party sensors to the biosignalsplux hub or biosignalsplux wearables that lie
within the specified and compatible electric values of the biosignalsplux HUB. Please read
the breakout PCB section of this manual before before trying to use any 3
rd
party sensor
with biosignalsplux.
4.3.1 I/O Breakout Cable
WARRANTY WARNING
Usage of this breakout cable input interface VOIDS THE ELECTRICAL WARRANTY of
your device and sensors.
DISCLAIMER
BEWARE when using this accessory as to preserve electrical isolation of the user.
We expressly disclaim any liability whatsoever for any direct, indirect, consequential,
incidental or special damages, including, without limitation, lost revenues, lost profits,
losses resulting from business interruption or loss of data, regardless of the form of
action or legal theory under which the liability may be asserted, even if advised of the
possibility of such damages.
This accessory allows the connection, within the specified
electric values, of a wide range of analog or digital third party
sensors to the biosignalsplux hub. This allows, for instance, the
acquisition and visualization in real time on OpenSignals of a
third party sensor, using the biosignalsplux hub.
Specifications
Maximum Output Current:
Input Voltage Range:
Ouptput Voltage Range:
200mA (with no other sensors
connected to the hub)
0 – 3V
0 – 3V or ±1.5V (if reference is
GND)
Check the table below and the breakout cable datasheet (see annexes) for detailed
information about the pinout configuration for the analog ports (standard sensor
channels) and digital ports (8-channel biosignalsplux devices only) BEFORE CONNECTING
YOUR SENSOR TO YOUR DEVICE to avoid damaging your PLUX device.