Manualshelf

Data Sheet

ManualsBrandsPLUX ManualsBiometric SensorsBiosignalsplux Professional Research Kit (8 Sensors)
81828384858687888990
biosignalsplux
User Manual
!
!
!
86!of!159!
!
How to configure your foot switch in OpenSignals (r)evolution to trigger acquisitions
If the intended use of the foot switch is supposed to trigger the start of an acquisition, it
is needed to turn on this feature in the device manager. For this, open the OpenSignals
(r)evolution device manager and select the device you have your foot switch connected
to. In the device’s panel, click on the circle next to TRIGGER to activate the trigger feature
(circle must be blue; see Figure 74).
Figure 74: Trigger configuration.
In the information bar of OpenSignals’ real-time acquisition mode (located right below
the acquired signals), the state of the trigger feature is displayed (see Figure 75).
Figure 75: Trigger state.