Data Sheet

biosignalsplux
User Manual
!
!
!
83!of!159!
!
4.1 Actuators
4.1.1 Handheld Switch
Figure 68: Handheld switch.
This trigger device is useful to begin acquisition via Bluetooth to OpenSignals (or any
other custom software) or to manually start offline acquisitions stored in the hub’s
internal memory when no Bluetooth connection is available.
How to connect your accessory to your biosignalsplux
The handheld switch needs to be connected to the digital port of your device (see 2.3.4
Digital Port).
How to configure your handheld switch in OpenSignals (r)evolution to mark events
Input devices, such as the handheld switch, do not require to be configured in OpenSignals
(r)evolution if their intended use is to mark specific actions during an acquisition. In this
case, their input state can be seen in OpenSignals’ real-time acquisition mode in the
information bare located right below the acquired signals (circle to the left of INPUT
DIGITAL). The digital input circle will turn blue if a digital input has been received
(handheld switch pressed) or be kept empty if no digital input has been received
(handheld switch not pressed; see Figure 69)
Figure 69: Digital input states.