Data Sheet

biosignalsplux
User Manual
!
!
!
77!of!159!
!
to OXI (click on the arrow in the channel’s field that appears when you hover over the
channel’s field and select OXI from the dropdown menu). Select the channel of your heart
rate signal channel and set the sensor type to HR
6
.
Activate both channels for signal acquisition by clicking on the circle in the channel field
(must be blue).
How to use your sensor
This sensor is designed to measure oxygen saturation levels and heart rate on the index
finger.
To start acquiring a signal with this sensor when using OpenSignals (r)evolution, start the
signal acquisition in OpenSignals and hold the On/off button at the top side of your sensor
until the display is turned on. The sensor data will no be visible in OpenSignals (r)evolution.
If configured correctly, your acquired signals should be similar to the signal displayed in
Figure 65.
Figure 65: SpO2 reader sample.
6
The sensor types OXI (oxygen saturation level) and HR (heart rate) are only supported by OpenSignals
(r)evolution versions of 30.01.2018 or newer.