Data Sheet

biosignalsplux
User Manual
!
!
!
74!of!159!
!
3.2.9 Blood Pressure Reader (BPR)
Figure 62: Blood pressure reader.
This user-friendly upper arm cuff-based blood pressure monitor measures systolic &
diastolic blood pressure levels (in mmHg) with ± 3mmHg accuracy. The built-in colour
LCD display displays all measured blood pressure values and additional heart rate
information (bpm) and allows this sensor to be used both as standalone device or as
biosignalsplux sensor within our OpenSignals (r)evolution software.
NOTE
This sensor is an adaptation of the 3rd party CK101 Wrist Blood Pressure Monitor which
provides compatibility with biosignalsplux devices. It can be used both as standalone
device or as biosignalsplux sensor.
Please do also read the datasheet of the standalone device before using this sensor:
http://biosignalsplux.com/datasheets/telemedicine/Goodwill_Studio_Ver1.pdf
How to connect your sensor to your biosignalsplux
Connect the BPR sensor to the adapter box. When done, connect the outgoing cables to
any available analog inputs of your biosignalsplux (see 2.3.2 Analog Inputs). Note that this
sensor has individual channels for the diastolic and systolic signals.
How to configure your sensor in OpenSignals (r)evolution
Open the OpenSignals (r)evolution device manager and select the device you have your
BPR sensor connected to. Select the channel of your diastolic signal channel and set the