Data Sheet

biosignalsplux
User Manual
!
!
!
50!of!159!
!
3.1.8 Force (FSR)
Figure 34: Force sensor.
From reaction time measurement to load distribution in shoe insoles, our thin film force
sensors offer uncompromised performance in the most demanding applications. The low
profile membrane and miniaturized signal conditioning circuitry are ideal for minimally
intrusive setups. Multiple sensing area dimensions and measurement ranges are available.
How to connect your sensor to your biosignalsplux
ECG sensors can be connected to any of the available analog inputs of your biosignalsplux
device (see 2.3.2 Analog Inputs)
This sensor does not require an additional reference electrode.
How to configure your sensor in OpenSignals (r)evolution
Open the OpenSignals (r)evolution device manager and select the device you have your
force sensor connected to. Select the channel of your force sensor and select CUSTOM
from the dropdown menu (click on the arrow in the channel’s field that appears when you
hover over the channel’s field). In the custom field of your channel, adjust the GAIN and
OFFSET that fits best to your application. Testing and readjustments of this parameters
might be needed to find the configuration that fits best your needs.
Activate this channel for signal acquisition by clicking on the circle in the channel field
(must be blue).
An example configuration is displayed in Figure 35 (here: force sensor connected to
channel 1).