Manualshelf

Data Sheet

ManualsBrandsPLUX ManualsBiometric SensorsBiosignalsplux Professional Research Kit (8 Sensors)
41424344454647484950
biosignalsplux
User Manual
!
!
!
41!of!159!
!
How to configure your sensor in OpenSignals (r)evolution
Open the OpenSignals (r)evolution device manager and select the device you have your
EEG sensor connected to. Select the channel of your EEG sensor and select EEG out of the
dropdown menu (click on the arrow in the channel’s field that appears when you hover
over the channel’s field). No additional set up is needed for the reference electrode inside
OpenSignals (r)evolution.
Activate this channel for signal acquisition by clicking on the circle in the channel field
(must be blue).
An example configuration is displayed in Figure 23 (here: EEG connected to channel 1).
Figure 23: EEG configuration in OpenSignals.
If configured correctly, your acquired signals should be similar to the signal displayed in
Figure 24.
Figure 24: biosignalsplux EEG sensor sample.