Manualshelf

Data Sheet

ManualsBrandsPLUX ManualsBiometric SensorsBiosignalsplux Professional Research Kit (8 Sensors)
31323334353637383940
biosignalsplux
User Manual
!
!
!
34!of!159!
!
Open the OpenSignals (r)evolution device manager and select the device you have your
ECG sensor connected to. Select the channel of your ECG sensor and select ECG out of the
dropdown menu (click on the arrow in the channel’s field that appears when you hover
over the channel’s field). No additional set up is needed for the reference electrode inside
OpenSignals (r)evolution.
Activate this channel for signal acquisition by clicking on the circle in the channel field
(must be blue).
An example configuration is displayed in Figure 17 (here: ECG connected to channel 1).
Figure 17: ECG configuration in OpenSignals.
If configured correctly, your acquired signals should be similar to the signal displayed in
Figure 18.