Data Sheet

biosignalsplux
User Manual
!
!
!
31!of!159!
!
then be used as reference signal for your EMG signal(s). For optimal signal acquisition,
place your ground electrode on a region of the body with low level of muscle activity.
How to configure your sensor in OpenSignals (r)evolution
Open the OpenSignals (r)evolution device manager and select the device you have your
EMG sensor connected to. Select the channel of your EMG sensor and select EMG out of
the dropdown menu (click on the arrow in the channel’s field that appears when you
hover over the channel’s field). No additional set up is needed for the reference electrode
inside OpenSignals (r)evolution.
Activate this channel for signal acquisition by clicking on the circle in the channel field
(must be blue).
An example configuration is displayed in Figure 14 (here: EMG connected to channel 1).
Figure 14: EMG configuration in OpenSignals.
If configured correctly, your acquired signals should be similar to the signal displayed in
Figure 15.