Data Sheet

biosignalsplux
User Manual
!
!
!
147!of!159!
!
Step 2: Installing PLUX-proven Bluetooth dongle
To install the PLUX-proven Bluetooth dongle, plug it into your computer. Windows will
install the Bluetooth dongle and display the window below.
Figure 131: Wait for Windows to install your Bluetooth dongle.
Make sure you wait until your Bluetooth Dongle is installed. Windows will issue a
notification and you’ll be ready to configure the correct Bluetooth stack following the
next step. Note, that this step might require a restart of your system. Make sure to close
all your open work and programs properly before restarting the system to prevent data
losses or other issues.
Step 3: Changing Bluetooth Stack to Microsoft’s native Bluetooth stack
To configure the Bluetooth stack of the Bluetooth dongle, you have to connect your
Bluetooth dongle to your computer and access the Device Manager on your computer.
Enter Device Manager into the search field of your taskbar and click on the listed device
manager.
In the device manager, the Bluetooth dongle should be listed as Generic Bluetooth Adapter
(see ). If your machine already has an internal Bluetooth Adapter and you have just
plugged in the PLUX-proven Bluetooth Dongle, keep in mind that the last one will be
automatically disabled by Windows. This is why one of your Bluetooth adapters under
Bluetooth in the device manager shows a yellow warning icon ( ) stating: Code 10 -
This device cannot start.
Figure 132: Bluetooth dongle listed in the device manager.