Data Sheet

biosignalsplux
User Manual
!
!
!
130!of!159!
!
7.4.2 Connecting via Terminal
NOTE
Using the terminal may harm your computer if it is not done correctly. Therefore, this
method is recommended for advanced users only and following this method is done at
your own risk.
To connect your device to your computer via Bluetooth, click on the Unity Dash logo in
the toolbar on the left to your desktop open the search function. In the search bar, enter
terminal (or Terminal) and click on the terminal logo to open the Terminal.
Figure 114: Access the terminal using the search function in Ubuntu.
Enter bluetoothctl into the terminal window (without the $). Terminal should answer to
this command with the a line displaying the MAC address of your internal Bluetooth
adapter. The response should be similar to this (with AA:BB:CC:DD:EE:FF being replaced
with your MAC address):
$ bluetoothhctl
[NEW] Controller AA:BB:CC:DD:EE:FF ubuntu [default]
[bluetooth]#
Next, enter turn on your internal Bluetooth module on (if not done before) by entering
power on into the Bluetooth prompt line. The response should be similar to this (again,
with AA:BB:CC:DD:EE:FF being replaced with your MAC address):