Data Sheet

biosignalsplux
User Manual
!
!
!
84!of!159!
!
The received inputs will be visualized in an extra channel named IO1 in the visualization
mode.
How to configure your handheld switch in OpenSignals (r)evolution to trigger acquisitions
If the intended use of the handheld switch is supposed to trigger the start of an
acquisition, it is needed to turn on this feature in the device manager. For this, open the
OpenSignals (r)evolution device manager and select the device you have your handheld
switch connected to. In the device’s panel, click on the circle next to TRIGGER to activate
the trigger feature (circle must be blue; see Figure 70).
Figure 70: Trigger configuration.
In the information bar of OpenSignals’ real-time acquisition mode(located right below the
acquired signals), the state of the trigger feature is displayed (see Figure 71).
Figure 71: Trigger state.
Accessory specifications
Please read the datasheet of handheld switch carefully before using it the first time. The
datasheet can be downloaded here:
http://biosignalsplux.com/datasheets/BTN_Sensor_Datasheet.pdf