User Guide

Assemble and Connect
In the Box
Calibration sheet
Accessory bag
Clean Cloth
Open cover and remove all packing material. Close the cover until you
hear it click into place.
Power on
before scan
Connect scanner to computer.
Customize your scan prole
1. Double-click New button. Set Prole Name  (e.g., ABC
order) and Filename Format  (e.g., Naming by Barcode).
3. Select Resolution (dpi), Color Mode and Paper Size, you may tick
the check box of each function on the right-hand side to optimize
your scan images.
4. Select desired le format from the dropdown list.
● In order to activate image to text conversion, please select
“Searchable” and “OCR Language”.
Enable “Searchable” function need more time for the le
conversion to nish.
● Deselect the “Multi Page” function, then you can save each page
by each PDF le.
2. Select le saving folder
.
You may save the le to FTP folder.
5. Click OK to complete the settings. Double-click the job button you
created to start scanning, or you can drag the buttons to the left
for shortcut.
Install Software and Scan a Document
Insert the setup DVD or download and run the product’s software
package.
Visit Plustek’s support site listed below for your model.
www.plustek.com/SmartOce/Start
(1) Launch scan software
Click
shortcut
(2) Check Scanner status
(3) Fan the stack of paper well to avoid paper jams and misfeeds.
At an angle
Feed direction
(4) Load your papers facedown, top edge rst.
(5) Double-click the Quick Scan button to quickly scan
through the simplify settings.
Adjust Source, Resolution (dpi), Color Mode and Save Path, then
click Scan button. The application starts automatically and your
document is scanned.
1
2
PS186 / PS188
Quick Start Guide
P/NO.: 17-07-2A61040-C



Scan QR code to see tutorial videos