User Manual

Scanner Buttons Guide10
©
2.2.1
Add/Modify Linked Application dialog box
Within the Button Configuration window click the
Scan
icon on the left pane and
then click
or
in the right pane, which opens this dialog box.
The items and parameters available in the window are explained as follows:
Application
Click
to browse to the desired program folder and select the executable file
(*.exe) of the desired application program. The application is displayed here with
its full file path and execution file name.
Name
Enter the name for the newly-added application program. The name can be short
like a nickname or even in more words including complete software name and its
vendor name; that is, write anything that can help you recognize this linked
application.
This name will be displayed in the Application's drop-down menu in the Button
Configuration window.
Memo
Optionally you may enter
a short description here.
Command Line
Enter the command li
ne
and add %1 at the end of the command line
to perform a
specific task if you have such information for the selected application program. It
is recommended that you leave this field blank if you will not use or are unsure of
the command line.
2.2.2
Save Setup dialog box (for Scan Button Settings)