User Manual

The TWAIN Interface 11
©
manually shift the merging position of the two scanned pages to rectify any up,
down, left or right deviation.
·
If you select
Horizontally
as the merging mode, you will enter the
Horizontal
Merging Adjustment
window after the scanning is done showing the two
scanned pages ready to merge. You may click the arrow buttons to move one of
the pages, with one click moving one pixel.
·
If you select
Vertically
as the merging mode, you will enter the
Vertical Merging
Adjustment
window after the scanning is done showing the two scanned pages
ready to merge. You may click the arrow buttons to move one of the pages, with
one click moving one pixel.
When the adjustment is done, click
OK
to start the merging.
2.2.1.4
Split (This function may or may not be available depending on the scanner model you
purchase)
Tick the check box of
Split
, a scanned image will be split in two equal halves and
each equal half is called a page. The
Remove Blank Pages
function is valid for
each split half so the blank half (one page) will be skipped. This function is
disabled when the
Merge Pages
function is enabled and vice versa.
Check the radio button of
Horizontally
and the scanned image can be split
horizontally. Check the radio button of
Vertically
and the scanned image can be
split vertically. You can make the selection of
Horizontally
or
Vertically
only when
the function of
Merge Pages
or
Split
is enabled
.
2.2.1.5
Page Size
Adjust this setting to tell the scanner the size of paper to scan.
Popular paper sizes have been preset in this TWAIN program. If you select
Custom...
from the drop-down list, a
Custom Page Size
dialog box opens and
you may tailor the page size for documents frequently scanned.