User Manual
20
4. Press the Scan button.
5. The scanner starts to scan immediately and carry out the corresponding action
according to settings you have set up in the Button Configuration window.
Attention
Place only text documents for OCR purposes.
Do not scan a photo using the OCR button.
Scanning from the Icon in the Left Side of the DocAction
Window
You can perform scanning task by double-clicking the icon in the left side of the
DocAction window. Follow the steps described below:
1. Insert the document face up into the scanner. Adjust the paper width slider for
the paper size you are using.
2. Check current button settings by viewing the Button Configuration window. If
needed, you may also modify settings to meet your current needs.










