User Manual

15
Attention
Before you start scanning, check the following:
 The power of both your computer and
scanner is turned on.
 The icon
appears on the Windows
system tray.
 Paper is appropriately loaded into the
scanner.
Scanning via TWAIN Interface
The TWAIN program is a very important piece of software that comes with your
scanner. This program acts as an interface between the scanner hardware and the
image-editing software you are using to view and edit images. The TWAIN program
allows you to adjust a number of settings to define the quality of the scanned image.
The following describes how you may use our bundled business card recognition
software (NewSoft Presto! BizCard) to scan via TWAIN interface. When you get
familiar with the scanning, you may alternatively use other TWAIN compatible scanning
program or image-editing application to do your scanning projects.
Scan within NewSoft Presto! BizCard:
1. Click the Windows Start button to launch Presto! BizCard. (For Windows 8.1
users: Point your mouse cursor to the upper or lower right corner of your screen
to open the Charm bar. Click on the Start charm, then click on the downwards
arrow button in the lower left corner of the screen. The Apps screen will be
shown. Move your cursor to the right edge of the screen to scroll right until you
find Presto! BizCard, and then click on Presto! BizCard.)
Attention
If you have more than one scanner or other
imaging devices installed on your computer, you
need to set this scanner as the default scanning
source before you acquire the TWAIN program.
1. From the File menu, click Select Scanner.
2. In the window that opens, choose this
scanner and then click the OK button to set
this scanner as the default scanning source.
2. Within Presto! BizCard, click File > Scan with TWAIN user interface.
3. In the TWAIN window that opens, select Sheet Feeder (Front Side) as the
Scan Type if you want to scan single-sided documents, or select Sheet Feeder
(Duplex) to scan double-sided documents.