User Manual

10
To properly test your scanner, please perform the following steps:
1. Vertically load the business cards, insert the card toward the center of the
scanner until the card being grabbed by the scanner.
2. Click the Windows Start button to launch Presto! BizCard. (For Windows 8.1
users: Point your mouse cursor to the upper or lower right corner of your screen
to open the Charm bar. Click on the Start charm, then click on the downwards
arrow button in the lower left corner of the screen. The Apps screen will be
shown. Move your cursor to the right edge of the screen to scroll right until you
find Presto! BizCard, and then click on Presto! BizCard.)
3. (If you have only one scanner connected with your computer, please skip to
Step 4.)
From the File menu, click Select Scanner. In the window that opens, choose
this scanner and then click the OK button to set this scanner as the default
scanning source.
4. Within Presto! BizCard, click File > Scan with TWAIN user interface.
5. Select Sheet Feeder (Front Side) as the Scan Type within the TWAIN window.
Adjust the scanning settings (Paper Size: Automatic Size, Resolution: 300).
6. Click the Scan button.
7. If an image appears on your screen, your scanner is working properly.
Installing Additional Software
Your scanner is TWAIN compliant and functions with virtually any available
TWAIN compatible software. If you purchase additional software to be used with your
scanner, please make sure that it conforms to the TWAIN standard.