Datasheet

7. Click “Update” button to refresh the list in the white pane of this window.
IP Configuration Information
You may get the IP configuration information of your PC by following the steps
described as below:
1. Click “Start”>”Programs”>”Accessories”>”Command Prompt”, and open
the Command Prompt window.
2. Type in “ipconfig” after “C:\>”.
3. Write down the information including IP Address, Subnet Mask, Gateway
for IP configuration of the Network camera.
Information
When you connect the network camera to your PC
directly or your community network, the PC IP
configuration information is for your reference to revise
the last number and specify a unique IP address for the
network camera.
51