Datasheet

1. Insert the RJ-45 connector into the Ethernet port of the network camera.
2. Connect the Ethernet cable to the PC’s Ethernet port.
3. Connect the AC adapter to the DC IN Jack of the network camera.
4. Plug the AC adapter into a standard wall outlet.
5. If the LED indicator keeps flashing, the network camera is successfully
connected.
Information
For more information about the LED indicator, please
refer to “
LED indicator” section.
Method II. Connect to an Organization’s Network
Usually an organization’s network is connected to Internet via Ethernet
switching hub. If you are to connect the network camera to a company network
or a community network, please follow the steps:
1. Insert the RJ-45 connector into the Ethernet port of the network camera.
2. Connect the Ethernet cable to the hub’s port.
3. Connect the AC adapter to the DC IN Jack of the network camera.
4. Plug the AC adapter into a standard wall outlet.
15