Datasheet

6. Click the Scan button.
7. When the scan finishes, click the Exit button to close the TWAIN window. The
scanned images are displayed in Presto! ImageFolio, and you may perform the
image editing tasks.
Scan within I.R.I.S. Readiris Pro 10 Corporate Edition:
1. Click the Windows Start button to launch Readiris Pro 10 Corporate Edition.
Attention
If you have more than one scanner or other imaging
devices installed on your computer, you need to set
this scanner as the default scanning source before
you acquire the TWAIN program.
1. In Readiris Pro 10 Corporate Edition, click the
Scanner button located on the left side.
2. In the Type window that opens, select Show
TWAIN User Interface and then click the OK
button.
3. In the next window that pops up, click the
Configure button.
4. In the Select Source window that opens, choose
this scanner and then click the Select button to
set this scanner as the default scanning source.
5. If you want to scan from ADF, tick the box of ADF
on the right of the following window; if you want to
scan from Flatbed, uncheck that box of ADF.
6. Click the OK button to return to Readiris
workspace.
2. Within Readiris Pro 10 Corporate Edition, click the
Scan button located
on the left side.
3. In the TWAIN window that opens, select Flatbed Reflective or ADF as the
Scan Type.
4. Adjust the scanning settings.
5. Click the Preview button. The scanned image should appear in the Preview
Window. To define the margins and crop out sections of the image you don’t
want scanned, use the mouse to click and drag the corners or sides of the scan
22