Specifications

Superior Design

• Hybrid Distribution System keeps resin compacted and

maximizes salt efficiency.

• Clear aircheck provides viewing of brine draw and refill

functions and eliminates the need for an external brine

valve.

• Patented proportional brining regenerates only the

exhausted portion of the resin bed for maximum salt

efficiency.

• Fewer parts than any control system of comparable

function and most controls of lesser function.

• The valve may be indexed manually without power to

any one of its service or regeneration positions. The

Regeneration Cycle indicator on the cam gear indicates

control valve position.

• No dynamic seals that could cause leakage through wear

or fatigue.

• Control accepts a wide selection of plumbing

connections or modular bypass valves offering complete

versatility and easy plumbing for any installation.

• Drain flow control is built into the valve to control

backwash flow rate. Not included on Model 1130 or

1150FA.

Superior Operation

• Direct acting system functions independently of water

pressure. No pistons or diaphragms that require a

minimum water pressure to operate.

• Five-cycle operation provides for down-flow

conditioned water, soft water refill of the brine tank, up-

flow brining and slow rinse, up-flow backwash and

down-flow fast rinse.

• Valve discs are held closed by water pressure and are

leak tight. Valve seats are in a vertical position, which is

the position least vulnerable to plugging.

• System operation cannot get out of phase or sequence.

The control always returns to a fixed conditioned water

position after regeneration.

• Bypass water is automatically available during

regeneration.

• Soft water is used for brine refill.