Specifications

11
Table 1 - Level 1 Programming Parameters
Parameter
Range of Values
Minimum
Increments
Default
Units of
Measure
Notes
Name Description
P1
Time of day
AM or PM
1:00 to 12:59
00:00 to 23:59
1 None Hour:minute
Range depends on value selected for
P13. Enter the current time.
P2
Time of day of
regeneration
1:00 to 12:59 AM
or PM
00:00 to 23:59
1 2:00 AM Hour:minute
Range depends on value selected for
P13. Skip this parameter to accept
the default or enter a new time.
P3
Hardness of
Water
3 to 250
30 to 2500
1
10
10
100
Grains/gallon
milligrams/L
Unit of measure depends on value
selected for P12. Test water hardness
(compensated hardness) and enter
that value.
P4 Salt amount
0.5 to 99.5
0.1 to 25.5
0.5
0.1
6
2.5
Pounds
Kilograms
Unit of measure and default depends
on value selected for P12. Select salt
amount from Table 2 and enter that
value.
P5
Capacity of
unit
0.1 to 140.0
0.01 to 14.00
0.1
0.01
1.0
0.1
Kilograins
Kilograms
Unit of measure depends on value
selected for P12. Enter the unit
capacity. Refer to Table 2.