User Manual

Model 2110 Limited Module Tag Manual
Page 11 of 12
FCC Section 15.212 Compliance
The PLUS 2110 Tag complies with FCC Section 15.212 rules concerning Limited Single-Modular Transmitters.
The requirements of 15.212 and KDB Publication 996369 D01 for Limited Single-Modular Transmitters and
additional implementation details are addressed below.
Limitations for Third Parties
As a Limited Single-Modular Transmitter, the integration of the module and qualification of each host device
product will be controlled by PLUS Location Systems USA, LLC (PLUS). PLUS will only sell or provide completed
host products to third parties.
PLUS will not provide modules to third parties or enable third parties to integrate the modules. Note that a
contract manufacturer building products according to PLUS’ specifications is considered to be working under
the direction of PLUS, not as an independent third party.
Software Control and Software Defined Radios
For clarification, this device is not a Software Defined Radio (SDR). Additionally, no software parameters are
accessible or controllable to set power levels or other characteristics of the device that influence compliance.
Host Product Compliance
Any host product equipment functions not associated with the transmitter module (such as unintentional
radiator elements) will be independently tested for compliance. Testing of the host product will be performed
with the module installed and operational.
Module as a Printed Wiring Assembly (PWA)
The Limited Module is implemented as a physical Printed Wiring Assembly (PWA) with two electrical
connections; a ground connection and 3V DC power.
Non-Accessible Module
The Limited Module integrated into the host device will not be accessible or replaceable by end users.
Integration Instructions
PLUS will maintain product assembly documentation for the Limited Module and host products for use by
itself and its contract manufacturer. The Limited Module will not be made available to third parties for
integration.