Manualshelf

User's Manual

ManualsBrandsPLUS Location Systems USA ManualsElectronics2111 Tag Module
12345678910
Model 2111 Modular Tag Manual
Page 6 of 16
Introduction
The Plus Model 2111 Modular Tag is a complete PLUS UWB Tag design for integration into a PLUS printed
wiring assembly (PWA) and enclosure, and connected to a power source. It has the following features:
Runs from a 3 volt DC power source (can operate down to 2 volts DC)
Will transmit a UWB packet at a rate set at time of manufacture. Rate can be set to 1Hz, 6Hz, 8Hz,
10Hz, 15Hz or 20Hz.
Meets FCC Section 15.212, rules concerning single modular transmitters.
Certified to comply with FCC Part 15.519