User's Manual

Model 2112 Modular Tag Manual
Page 9 of 16
Mounting
Depending on end user requirements, mounting methods will vary.
Identification
Per
FCC Section 15.212: The 2112 Tag
FCC identification (ID) will be printed via the silkscreen on the TOP
side of the board.
Figure 1-1 below shows the FCC ID as it appears on the bottom of the board right above the PLUS copyright
and PWB identification:
FOR THE USER IMPLEMENTATION OF THE 2112 TAG:
Per FCC Section 15.212: The FCC identification (ID) information for the 2112 Modular Tag must be visible on
the End product. The information must include product model number and the statement “CONTAINS FCC ID
ZEH0116”. Other information such as a unique serial number is encouraged but is not a requirement. PLUS
document 320-0315 provides a template for required information and layout for the End Product ID label.
Figure 1
-
1