Submittal Sheet

This specification and all information contained herein is the confidential and exclusive property of
Brasscraft Manufacturing Co., and shall not be disclosed to others without the written consent of
Brasscraft Mfg. Co. This specification must be returned to Brasscraft Mfg. Co. if requested.
400.190 PLS1_PLS3_DL SS Toilet Connector – Comp x Ballcock Rev. 03/17 2017 Brasscraft Mfg. Co.
Product Submittal Form
PLS1-** / PLS3-**DL Stainless Steel Flexible Braided Toilet
Water Connector - Compression Inlet x Ballcock Outlet
Use: For use only in potable water distribution systems in accessible locations only.
Part Listing:
PLS1-9DL F 3/8” compression x 7/8” ballcock x 9” length, flag label
PLS1-12DL F 3/8” compression x 7/8” ballcock x 12” length, flag label
PLS1-12DLM F 3/8” compression x 7/8” ballcock x 12” length, metal nut, flag label
PLS1-16DL F 3/8” compression x 7/8” ballcock x 16” length, flag label
PLS1-20DL F 3/8” compression x 7/8” ballcock x 20” length, flag label
PLS2-12DL F 7/16” compression x 7/8” ballcock x 12” length, flag label
PLS3-12DL F 1/2” compression x 7/8” ballcock x 12” length, flag label
PLS3-20DL F 1/2” compression x 7/8” ballcock x 20” length, flag label
Listings & Certifications:
 IAPMO listed to ASME A112.18.6 / CSA B125.6 (file # 5311)
 IAPMO listed to NSF 372 for Low-Lead Compliance (file #6624)
 IAPMO listed to NSF 61/9 (file #N-6632)
For Residential and Commercial Applications
Operating Specifications
Temperature
Pressure
Tubing Diameter
40°- 140°F, Intermittent to 180°F
125 PSI maximum
0.300” ID(0.510”OD)
MATERIAL SPECIFICATIONS
Inner Hose
Reinforced PVC
Braiding
Stainless steel wire
Barb
Brass
Ferrule
Stainless steel
Nut
Plastic
Washer
Rubber
Compression Nut
Brass
PART DIMENSIONS (Inches)
Model
DIM. A
PLS1-9
9.0/10.0
PLS1-12
12.0/13.0
PLS1-16
16.0/17.0
PLS1-20
20.0/21.0
PLS2-12
12.0/13.0
PLS3-12
12.0/13.0
PLS3-20
20.0/21.0
JobName

Engineer/Architect

JobLocation

Wholesaler

SubmittalDate

Contractor
