Installation Instructions

• Turn water off at the tap.

• Remove old basket strainer.

• Clean thoroughly around drain opening in sink.

• Remove locknut A and washers B and C and bottom slip

nut D and washer E.

• Apply a small amount of plumbers’

putty or appropriate silicone

sealer (sold separately)

around top hole in sink about

• Insert basket strainer

into sink opening.

• Slip large rubber and fiber washer

up to sink. Thread locknut A up to

washers and tighten.

• Slip washer E onto drain tailpiece. Connect tailpiece to

strainer with slip nut D. Tighten to strainer. Run water to

test for leaks.

PREMIUM KITCHEN

SINK BASKET ASSEMBLY

Plumb Works Models: 6790160, 6790161, 6790162, 6790163, 6790164, 6790165,

6790166, 6790167, 6790169, 6790170, and 6790171

Recommended procedure for installation