Installation Instructions

Installation Instructions:
Read instructions thoroughly before installation.
This installation requires the following tools: Wrench or pliers, cloths,
and pipe compound or thread seal tape. When using wrench or
pliers, always protect finishes by wrapping parts with a cloth.
1. Remove existing showerhead, arm and flange.
2. Slide the flange over the wall end of the new shower arm. In a
clockwise direction, apply 2-3 complete wraps of thread sealant
tape to the both ends of the shower arm.
3. Screw the wall end of shower arm into fitting inside of wall. Hand
tighten only. Slide the flange along the shower arm until it is flush
with the wall.
4. Attach showerhead (sold separately) according to manufacturer's
instructions. Turn on water and check for leaks.
• Allows the position of the showerhead to be easily adjusted
• Installs quickly and simply
• Replaces shower arms with 1/2" I.P. connections
• Fits most standard showerheads
• EPDM inner with flexible metal sleeve and stainless steel ends
Includes:
(1) 11-1/2" Flexible shower arm
(1) Flange
Flexible Shower Arm
with Flange
1. 2.
3. 4.