Installation Instructions

1.
2.
3.
4.
Rain Shower Arm
with Flange
• Extends 6" from ceiling for rain shower heads
• Durable metal construction
• Installs easily
• Fits showerheads with 1/2" IP connections
Includes
(1) 6" Shower arm
(1) Flange
(1) Allen wrench
Installation Instructions:
Read instructions thoroughly before installation.
This installation requires the following tools: Wrench or
pliers, cloths, and pipe compound or thread seal tape.
When using wrench or pliers, always protect finishes by
wrapping parts with a cloth.
1. Remove existing showerhead, arm and flange. In
a clockwise direction, apply 2-3 complete wraps of
thread sealant tape to the top end of the shower
arm.
2. Thread one end of shower arm into threaded fitting
in ceiling.
3. Slide the flange onto the shower arm and place
flush to the ceiling.
4. Tighten set screw on flange with provided Allen
wrench. Attach showerhead (sold separately)
according to manufacturer's instructions. Turn
on water and check for leaks.