Installation Instructions

Installation Instructions:

Read instructions thoroughly before installation.

This installation requires the following tools: Wrench or pliers, cloths, and pipe compound

or thread seal tape. When using wrench or pliers, always protect finishes by wrap-

ping parts with a cloth.

1. Remove existing showerhead, arm and flange. In a clockwise direction, apply

2-3 complete wraps of thread sealant tape to the both ends of the shower arm.

2. Screw the wall end of shower arm into fitting inside of wall. Hand tighten only.

Slide the flange along the shower arm until it is flush with the wall.

3. Attach showerhead (sold separately) according to manufacturer's instructions.

Turn on water and check for leaks.

Shepherd’s Hook Shower Arm

with Flange

• Extends from wall for installation of larger showerheads

• Durable metal construction

• 1/2" IP connections fit most standard showerheads

• Installs easily

Includes

(1) 16" Shower arm

(1) Flange