Installation Instructions

• 6" diameter showerhead with single spray setting

• Arm allows the height and angle of the showerhead

to be easily adjusted

• Installs easily

• 2.5 gallons per minute flow rate

Includes:

(1) Showerhead with adjustable shower arm

(1) Allen wrench

Installation Instructions:

Read instructions thoroughly before installation. This installation

requires the following tools: Wrench or pliers, cloths, and pipe

compound or thread seal tape. When using wrench or pliers,

always protect finishes by wrapping parts with a cloth.

1. Remove existing showerhead. In a clockwise direction, apply

2-3 complete wraps of thread sealant tape to the end of the

existing fixed shower arm.

2. In a clockwise direction, attach the adjustable arm to the fixed

arm and tighten using a wrench.

3. Once installed on the shower arm, tighten the set screw on

mounting nut using the provided Allen wrench. Adjust the shower

arm at both hinges and secure in place by tightening the levers.

Turn on the water and check for leaks.

Showerhead

with Adjustable Arm