Installation Instructions

For Models: 678-4368

Hi-Rise Shower Arm with Flange

TOOLS NEEDED FOR INSALLATION: Read instructions before installation!

Depending on your installation, you may require the following supplies:

Wrench or pliers, steel wool rags and thread seal tape.

Important: Always protect parts with a heavy cloth when using

wrench or pliers.

INSTALLATION:

1. Remove old flange, using screwdriver to carefully pry away from wall.

2. Remove old arm by turning counter-clockwise with wrench.

3. Slide new flange onto arm. Wrap threads on one end of arm with thread

seal tape in a clockwise direction.

4. Screw taped end of arm into plumbing connection inside wall. Hand tighten.

5. Wrap arm with cloth to protect finish and wrench tighten.

6. Push flange against wall. Wrap threads of shower arm with thread seal tape,

as explained above. Install new showerhead and hand tighten. Wrap a cloth

around showerhead to protect finish and wrench tighten.

7. Check for leaks.

Have an installation question? DO NOT RETURN THIS PRODUCT TO THE

STORE. Call toll free: 1-800-545-5230 Monday thru Friday 8:00am - 5:00pm CST

PAGE 1
For Models: 678-4368 Hi-Rise Shower Arm with Flange TOOLS NEEDED FOR INSALLATION: Read instructions before installation! Depending on your installation, you may require the following supplies: Wrench or pliers, steel wool rags and thread seal tape. Important: Always protect parts with a heavy cloth when using wrench or pliers. INSTALLATION: 1. Remove old flange, using screwdriver to carefully pry away from wall. 2. Remove old arm by turning counter-clockwise with wrench. 3. Slide new flange onto arm.