Installation Instructions

TOOLS NEEDED FOR INSTALLATION: Read instructions thoroughly before
installation! This installation requires the following supplies: Wrench or
pliers, steel wool, rags, pipe compound or thread seal tape, shower arm and
flange (if existing shower arm has ball at the end.) When using wrench or
pliers, always protect finishes by wrapping parts with a cloth.
Remove old shower head from shower arm. If old shower arm has a ball
where shower head connects to arm, replace with shower arm with threads
on both ends. Clean threads with steel wool.
Follow steps below, as required for your installation:
For installation directly to shower arm:
Attach shower hose to shower arm. Attach other end of hose to personal
shower.
For installation to shower diverter valve:
Attach shower hose to bottom of diverter valve. Attach other end of hose to
personal shower.
For installation to tub diverter valve:
Attach shower hose to bottom of diverter valve on tub spout. Attach other
end of hose to personal shower.
To Shower Arm: To Diverter Valve: To Diverter Spout:
Installation
Chrome Shower Hose
Have an installation question? DO NOT RETURN THIS PRODUCT TO THE
STORE. Call toll free: 1-800-545-5230 Monday thru Friday 8:00am - 5:00pm CST
For Models: 678-1103