Tools For Models : 6736997 » Adjustable Wrench » Teflon Tape » Groove Joint Puller Basin Wrench » Phillips Screwdriver Silicone Sealant Single Handle Basin Faucet Maintenance Your new faucet is designed for years of trouble-free performance. Keep It looking new by cleaning It periodically with a soft, damp cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and cold your warranty.
Parts Diagram / List —_ z O Part Name Handle Button Screw Handle Ceramic Cartridge Spout Aerator O-ring O-ring Inlet Pipe Flow Re stricter Washer Plastic Nut Screen Filter w 0|00 ~|on woo Preparation/Assembly 1. Shut off the water supplies before installation. Remove the current faucet, clean and dry the sink surface the new faucet will be installed on. 2.
Installation Instructions 3. Place silicone sealant beneath the base of faucet Position the faucet on counter top } s as shown. @ 4. Hand tighten washer (#11) and plastic nut (#12) from underneath, then tighten but do not over tighten. Hint-Easier to do with a second person holding the faucet In place while first person tightens the faucet. Please Note: Do not remove the customer service tag with the model number and phone number as this will be helpful if you need assistance in the future. 5.
9. Turn on the faucet handle for one minute to flush the debris from the faucet. Turn off the faucet. Trouble-Shooting If you've followed the Instructions carefully and your faucet still does not work properly, take these corrective steps. Problem Cause Action Leaks underneath handle,or water | Cartridge (#4) has come loose or | Tighten or replace the cartridge will not shut off completely. broken. Clean screen filter (#13) with a brush Screen fleeter (#13) s dirty.
