Installation Instructions

Assembly (Steps 7-11)
Have an installation question? DO NOT RETURN THIS PRODUCT TO THE
STORE. Call toll free: 1-800-545-5230 Monday thru Friday 8:00am - 5:00pm CST
4.
23
11. From underneath the sink thread the rubber washers (12) and
the plastic mounting nuts (13) onto the shanks and hand tighten.
NOTE: It is helpful to have a second person hold the faucet in place
while tightening the mounting nut. PLEASE NOTE: Do not remove
the customer service tag with the model number and phone
number as this will be helpful if you need assistance in the future.
10. Apply a thin bead of plumbers putty to the underside of the putty
plate (11) and carefully set the faucet shanks into sink holes
and position the faucet into the desired area.
7. Place the spray hose (16) in the hose guide (22) until the
spray head (23) rests in the hose guide (22, see inset).
8. From underneath the sink, push the spray hose (16) up through
the middle of the three remaining faucet holes.
9. From above the sink, thread the spray hose (16) clockwise onto
the sprayer outlet connection (25) on the faucet. It is easier to do
this before the faucet is installed. Tighten with a wrench but do not
over-tighten.
7
16
22
23
8
9
16
11
13
11
10
12