Installation Instructions

Assembly (Step 13)
Have an installation question? DO NOT RETURN THIS PRODUCT TO THE
STORE. Call toll free: 1-800-545-5230 Monday thru Friday 8:00am - 5:00pm CST
6.
13. Remove the spray head (2) from the spray hose (4). Point
the spray hose at the drain and then turn on the faucet, both
hot and cold. Run fully open for at least a minute; this will
flush out any sediment that may have been dislodged during
installation. While the water is still running, check for leaks
at the spray hose connection underneath the faucet deck
and at all drainage connections. If leaks are found, tighten
slightly until the leak stops. Re-attach the spray head to the
spray hose.
13
4
2
Lifetime Limited Warranty
Plumbworks
®
warrants this product to be leak and drip-free during normal
household use for as long as it is owned by the original consumer purchaser.
Should a malfunction occur within the time covered by this warranty,
replacement parts may be obtained from the place of purchase or from
Plumbworks
®
Customer Service Department at LDR Global Industries LLC,
600 North Kilbourn Ave., Chicago, IL 60624, 1-800-545-5230,
([e-mail]). Plumbworks
®
will, at Plumbworks
®
discretion, provide
replacement parts for installation by consumer for any parts that prove defective
under normal usage and service with new, like or equivalent Plumbworks
®
parts.
This warranty shall not apply to goods which have been subject to accidents,
negligence, improper installation or misuse.
Our responsibility under this warranty is limited only to replacement of parts
and no other costs.This warranty covers the original consumer purchaser
only and does not include business, commercial or industrial use of this product.