Installation Instructions

Assembly (Steps 9-12)

Have an installation question? DO NOT RETURN THIS PRODUCT TO THE

STORE. Call toll free: 1-800-545-5230 Monday thru Friday 8:00am - 5:00pm CST

9. Slide the balance weight (5) to the desired position on the

spray hose. Turn the top of the balance weight clockwise to

lock into position.

10. The balance weight (5) should be positioned just above the

hose bend on the spray head side. Pull the spray hose (4)

back and forth to check for smooth operation.

SPRAY

HEAD

SIDE

11. Attach one end of the water supply lines onto the faucet

shanks, hot water on the left and cold water on the right.

(NOTE: If you are installing new water supply lines, please

refer to the supply line manufacturer’s installation instruct-

ions.) Tighten the supply line connections using an adjust-

able or basin wrench.

12. Open the hot and cold water supply valves. Check for leaks

at the shut off valves and the the faucet shanks. If leaks

occur, tighten the connections slightly until the leak stops.