Installation Instructions

Assembly (Steps 21-23)
Have an installation question? DO NOT RETURN THIS PRODUCT TO THE
STORE. Call toll free: 1-800-545-5230 Monday thru Friday 8:00am - 5:00pm CST
7.
23. After the pop-up drain has been checked for leaks, empty the
sink. Run hot and cold water uninterrupted for about one minute
to remove any residue from the lines. Replace and tighten the
aerator.
21. Before turning the water on, unscrew and remove the aerator (24)
from the faucet spout. If necessary, use pliers and a cloth to
protect the finish of the faucet.
8
21
22
22. Open the hot and cold water supply valves. Check for leaks at
the shut off valves and the faucet shanks. If leaks occur, tighten
the nuts on the water supply lines and shut off valve. Fill the sink
with water to check for leaks. If water is leaking from the drain,
tighten the mounting nut (27) on the drain body (26).
Lifetime Limited Warranty
Plumbworks
®
warrants this product to be leak and drip-free during normal
household use for as long as it is owned by the original consumer purchaser.
Should a malfunction occur within the time covered by this warranty,
replacement parts may be obtained from Plumbworks
®
Customer Service
Department at LDR Global Industries LLC, 600 North Kilbourn Ave.,
Chicago, IL 60624, 1-800-545-5230, ([e-mail]). Plumbworks
®
will,
at Plumbworks
®
discretion, provide replacement parts for installation by consumer
for any parts that prove defective under normal usage and service with new, like
or equivalent Plumbworks
®
parts. This warranty shall not apply to goods which
have been subject to accidents, negligence, improper installation or misuse.
Our responsibility under this warranty is limited only to replacement of parts
and no other costs.This warranty covers the original consumer purchaser
only and does not include business, commercial or industrial use of this product.