Installation Instructions

Preparation/Assembly (Steps 1-5)

Have an installation question? DO NOT RETURN THIS PRODUCT TO THE

STORE. Call toll free: 1-800-545-5230 Monday thru Friday 8:00am - 5:00pm CST

2. Remove any dirt or plumber’s putty from around the faucet

holes on the sink.

5. Wrap thread seal tape in a clockwise motion to the copper

tubing threads (17). Apply a thin bead of silicone sealant to the

underside of the putty plate (19) and carefully slide the copper

tubing (17) and mounting bolts (13) into the sink holes and

position faucet into the desired area. Use caution whenever

bending copper supply lines.

1. Shut off the water supply from the stop valves by turning the

handle clockwise and remove the existing faucet from the sink.

3. Place the putty plate (19) onto the cover plate (23) and thread

the mounting bolts (13) to the underside of the cover plate (23).

4. Secure the mounting bolts (13) by tightening them with a

Phillips screwdriver.