Trim Kit Installation Guide

ManualsBrandsPlum ManualsShop All Plum ProductsPlum Plum 17 Inch Wide 2 Bottle Capacity Countertop or Built-In Wine Dispenser and Preservation System with Virtual Sommelier & Wine Recognition

Serving wine, just as the

winemaker intended

Summary of content (21 pages)

PAGE 1
Serving wine, just as the winemaker intended
PAGE 3
Index Section 1 - Exploded View….………………………………………………………………………………………………..….....Page 3 Section 2 - Bill of Materials…….….………………………………………………………………………………..………….…...Page 4 Section 3 - Cabinet / Plum / TrimKit…...…………………………………………………………………………..………….…...Page 5 Section 4 - Cabinet Ventilation Requirements……..……………………………………………………………..………….…...Page 6 Section 5 - Trim-Kit Location Requirement (when placed near wall)…………………………………………..………….…...Page 7 Section 6 - Tools Required…………….. ………...……………………………………………………………………..
PAGE 4
Trim Kit - Assembly Process Section 1 - Exploded View PLUM Item A Argon Hose Housing Assembly Item H Mounting Bracket Stop (2x) Item D Argon Tank Cover Item F Argon Tank Item A1 Door / Hinges / Panel Items B, E, J, K Mounting Bracket Item C Argon Tank Housing Assembly Item G 4
PAGE 5
Trim Kit - Assembly Process Section 2 - Bill of Materials 5
PAGE 6
Trim Kit - Assembly Process Section 3 - Cabinet / Plum / TrimKit 6
PAGE 7
Trim Kit - Assembly Process Section 4 - Cabinet Ventilation Requirements 7
PAGE 8
Trim Kit - Assembly Process Section 5 - Trim-Kit Location Requirement (when placed near wall) 8
PAGE 9
Trim Kit - Assembly Process Section 6 - Tools Required Philips Screw Driver Hex Screw Driver Scissors Center Punch Hammer (Little) Tape Measure Scotch Tape Dremel with 1.
PAGE 10
Trim Kit - Assembly Process Section 7 - Stop Washer assembly (Item C, D, L and T) Step 1 10
PAGE 11
Trim Kit - Assembly Process Section 7 - Stop Washer assembly (Item C, D, L and T) Step 2 11
PAGE 12
Trim Kit - Assembly Process Section 8 - PLUM Mounting Bracket install (Item C) Step 1 12
PAGE 13
Trim Kit - Assembly Process Section 7 - PLUM Argon Tank Housing (Item G) Step 1 13
PAGE 14
Trim Kit - Assembly Process Section 7 - PLUM Door, Panel and Hinges (Item E, B, J and K) Step 1 14
PAGE 15
Trim Kit - Assembly Process Section 7 - Remove Mounting Bracket Assembly (Item C) Step 1 15
PAGE 16
Trim Kit - Assembly Process Mounting Bracket Assembly (Item C and L) Step 2 16
PAGE 17
Trim Kit - Assembly Process Section 11 - Sliding PLUM (with mounting plate) to engage into Cabinet Stop Washers Step 1 17
PAGE 18
Trim Kit - Assembly Process Section 7 - PLUM Door, Panel and Hinges (Item E, B, J and K) Step 1 18
PAGE 19
Trim Kit - Assembly Process Section 14 - Door Assembly and Adjustment Step 1- Door Mounting 19
PAGE 20
Trim Kit - Assembly Process Section 7 - PLUM Door, Panel and Hinges (Item E, B, J and K) Step 2 - Door/Hinge Screw Adjustment 20
PAGE 21
Trim Kit - Assembly Process Section 14 - Door Assembly and Adjustment Step 1- Door Mounting 21