User manual

interface, the mobile side will pop-up the USB

Config interface. This time user should select the

“USB stand on tethering” mode, after that, phone

can acted as a wireless card, to support user

accessing the Internet.

Enter the "Control Panel" → "Network and

Internet" → "Network and Sharing Center", can be

seen more than one local connection there.

 The third Method：Phone can be acted as a

WIFI hotspot (Internet tethering

internet)，to support more WIFI devices to

access internet through it.

WLAN hotspot Internet access: the user can enter the

"Settings" → "External Connection" → "network share" →

"WLAN hot spots", to switch and set the SSID name, password

and other routine operations. When finished these steps, Phone

can be acted as a WLAN hotspot.

Note: The use of wireless Internet access, such as signal strength is

good, the screen top right of the light is on, such as signal strength

is weaker, and then the top left of the light is on.