User manual

17
“Enter Phone Lock Code” - indicates that you have set mobile
phone lock.
After inserting SIM card, the handset will automatically check if
the SIM is valid. Then, the following prompts will be displayed
in order on the screen：
1. “Enter Phone Lock Code” – in this case you have set mobile
phone lock.
2．“Enter PIN” – in this case you have set SIM PIN password.
3 “Invalid SIM” –in this case phone is not registered on
correct network, you can only dial emergency number.
4 ”Searching” –mobile phone is searching network until
proper network access is found.
3.2 Battery Installation
Please ensure the phone is turned off before removing battery!
Take out the battery：First, remove the back cover of phone, then
lift up the top of the battery to get it out.
Assemble battery: Put battery bottom side into the slot, pushing
the top of the battery into the slot.